Out on the trail, in the dunes, or on a high-speed dirt track, if you can’t see through your windshield, you’re backing off the throttle. UTVs, side-by-sides, dirt track race cars, and off-road rigs operate in harsh environments. Roost, thick mud, flying gravel, blowing sand, and heavy brush constantly blast your windshield and auxiliary light bars.
Trying to wipe down a muddy or dusty polycarbonate windshield on the trail or in the pits just grinds the grit directly into the surface. That creates severe sun glare and permanent scratches, forcing you to replace $300 to $600 windshields over and over again.
TearOff™ Products solves that problem with a field-tested, multi-layer solution. We make pre-laminated, ultra-clear peel-away sheets with a tough silica hard coat designed specifically for high-impact off-road optics. You stick the multi-layer film right over your windshield, side portals, or LED light bar lenses. It takes the direct punishment from flying rocks, roost, and heavy brush. When your view gets covered in mud or pitted from gravel, you don’t waste time scrubbing or running scratched glass. You simply grab the edge tab and peel away the top layer. In two seconds, you get a crystal-clear view back so you can keep your eyes on the terrain and stay pinned.
UTV / SxS & Trail Vehicles
Polycarbonate windshields, custom cab enclosures, side windows, and high-output LED light bar lenses.
Dirt Track & Circuit Motorsports
Dirt oval race car windshields, sports car windshields, rally car glass, and pit equipment optics.
Powersports & Recreational
Dune buggy viewports, snowmobile windshields, and custom recreational vehicle optics.
Stops Roost & Rock Chip Damage
Flying roost, gravel, sand blast, and heavy trail brush strike the sacrificial TearOff sheet—not your expensive windshield. Protects optics on top off-road and motorsports brands like Polaris RZR, Can-Am Maverick, Honda Talon, Kawasaki Teryx, and Yamaha YXZ.
Resists Mud & Sand Scouring
Thick mud, silica sand, and gritty trail dust won’t scour or scratch the surface. The silica-infused hard coat lets you run wipers or spray washdowns without grinding grit into the windshield.
Two-Second Peel-Away Recovery
When a layer gets caked in mud or pitted from gravel, grab the edge tab and peel it off. In two seconds, you have a clean, clear view again in the pit lane or out on the trail.
Distortion-Free High-Speed Optics
Factory-bonded optical clarity means zero air pockets, light refraction, or blinding sun glare. Drivers get a razor-sharp line of sight at high speeds when every second counts.
Mounts to Polycarbonate & Light Bar Lenses
Bonds clean to high-impact polycarbonate safety glass, custom racing windshields, side portals, and LED light bars. Available in standard rolls for custom trimming or pre-cut sheets tailored to your exact windshield profile.
Saves Aftermarket Windshield Budgets
Replacing custom or hard-coated $300 to $600 UTV windshields gets expensive fast. A sacrificial TearOff layer protects the original surface underneath, extending your windshield life indefinitely and saving you money.
Other Uses & Job Site Applications
Instant Vision Recovery
Clear off mud, roost, and heavy trail debris in two seconds flat without scrubbing or scratching the windshield.
Preserves Replacement Budget
Protects $300–$600 aftermarket and custom high-impact polycarbonate windshields from micro-pitting and brush scratches.
Distortion-Free High-Speed View
Maintains razor-sharp visual acuity without light refraction, blurry spots, or blinding sun glare.
